Tag Archives: relay racks

Four Reasons for 4-Post Racks

4 post server rack       4-Post Server Racks 

by TechRack Systems

In TechRack’s last post we gave the 411 on 2-post racks, their features and customization options. This time, we’re all about 4-post racks: A steady workhorse, 4-post racks are the perfect match to organize typical servers and networking equipment in office or data center environments. 4-post racks are geared to support heavier weight loads and easily accommodate growing workspaces, as they are easily ganged together. The classic 4-post server rack provides lots of options to choose from.

As an economical alternative to an 4-Post server rack, one could utilize a Rack-to-Frame Conversion Kit, which uses adjustable horizontal braces to connect two relay racks together into a 4-post rack (Bonus: You can also use this conversion kit to secure any telco rack to the wall for added support).

Now, let’s begin with the basics: Typically, 4-post racks are left open or are used as the structural frame of server enclosures. They range in depth from 24” to 42”, and in usable rack space from 6U to 44U (12” – 84” overall height). A variety of styles are available, from small cabinets to large cabinets and wall mounted units (or you can even customize your own—more on this later). Let’s take a look at why 4-post racks dominate the industry:

1. Strength: While a knocked-down 2-post rack typically supports 750 lbs., evenly distributed, fully welded 4-Post server racks can handle more than double or triple that amount. Many options are available, such as the value cabinet, which can support up to 1,500 lbs; the corporate cabinet, which can store up to 2,000 lbs; and the enterprise cabinet, our strongest line, that can handle up to 2,500 lbs. Our fully welded units are Zone 4 seismic rated, UL Listed and made in the USA.

2. Flexibility: Think “out of the box” too for unusual or compact spaces. You might want to consider small floor racks, designed for free standing floor use (many sizes are suited to tabletops or under desks), ranging in height from 12″ to 36″ and in rack space from 6U to 18U. Or try wall mounted computer racks aimed at maximizing the wall space, with depths of 12”, 24”, and 30”; and outside heights of 24”, 36” and 48” respectively. (Note that these racks can fit all 19” rackmount equipment from most major manufacturers, including DELL, HP and others).

3. Customization: To get exactly what you want for your office or data center, opt to build your own cabinet configuration (in fact, you can come up with as many as you need). Techrack customers can take advantage of this unique service to support their specific configuration for their data systems, computers, servers, and telecom equipment. Choose from open 4-post racks to fully customizable server rack cabinets to fit any environment and requirements. As one example, if your situation requires partial ventilation, you can add a perforated door or a vented side panel.

4. Security: More than ever, security has become paramount in the data server market, with low-tech (as in locking doors) and high-tech solutions like biometric identification. Heavy-duty 4-post enclosures can provide protection and confidence to keep intruders out, thanks to features like fully welded steel frames and lockable doors, which are available in plexiglas and perforated metal, and also meet HIPAA and other potential security requirements.

To find about more about ordering a sturdy, versatile 4-post racks or enclosures, contact sales@techrack.com.

2-Post Computer Server Racks “101”

2-post server rack 2-Post Computer Server Racks “101”

by TechRack Systems

One size does not fit all when it comes to server racks. The classic 2-Post Rack (also known as a “telco rack” or “relay rack”) is the most economical way to store 19-inch rack mount equipment, such as computer hubs, power backups, and rack mounted servers. In our two-part series, we will discuss characteristics of a 2-post relay rack (versus a 4-post rack), available configurations, and customization options (something TechRack uniquely offers).

2 Post Racks are often used instead of the conventional Server Racks, Computer Cabinets or Wire shelving Units, but they do have a few limitations.

Security and Temperature
Because 2-Post units are generally set up to be open, one must consider both security and air flow requirements in determining where they are to be situated. In terms of security, consider whether the equipment requires security, if the rack location will be in a small office so that only one person or a few people have access to it or if the racks are housed in a secure room or a “fenced in” area which provides the most security. For equipment that needs constant air flow due to high temperatures, open racks are best suited to meet this requirement, especially if they are installed in non-congested spaces.

Strength. No Matter How Light.
Any two-post rack you purchase should be sturdy and strong, whether it is used for storing light or heavy equipment (note: standard weight capacity is typically 750 pounds, evenly distributed). Techrack, as an example, only sells heavy-duty steel racks with upright channels, outfitted with heavy-duty and top-and-bottom aluminum angles. These are of knocked-down (KD) construction. For storage of even greater loads, consider the use of fully welded 4-Post open frames.

Know Your Equipment Layout
When configuring your relay rack requirements, there are a variety of heights available to accommodate office or data center equipment needs, such as 48″, 68″ or 84″. When it comes to rack spaces (“U”s), these range from 24U, to 45U. Note: 1U = 1.75 inches.

Don’t Forget Add-ons
There are some state and city ordinances that require bracing for earthquake-prone areas. Techrack offers universal earthquake bracing kits so that a rack can be secured to the ceiling or wall. Another method for securing a rack is a floor bracing kit (with seismic tie-down openings). An additional potential server rack requirement to consider is whether mobility around the office or data center is required. Techrack offers specially made relay rack rollers for this option (note: weight capacity is 300 pounds). It is unsafe to attach wheels or casters directly to the base of a relay rack.

Expand Your Space
If you want to have more room for equipment space altogether, you can also create a double telco rack by connecting two 2-post racks together to create a 4-post open rack. This method uses adjustable horizontal braces to connect the two relay racks together (more on this in our next blog post on 4-post racks).

Tailor to Your Exact Needs
One of the unique offerings Techrack provides in the industry is the ability to customize relay racks to meet specific needs that are not “standard equipment needs,” for instance, a rack with computer shelves, blank panels and power strips. In other words, you can take a modular approach to building your rack to create exactly what suits your needs. Customization can be wanted for a variety of reasons: an unusual configuration or shape of equipment, a working environment that may expand in the future, or having an odd office or data center footprint.

TechRack makes it easy to order customized 2-post racks; just select the frame you want and then add on the components you desire.

To find out more about ordering 2-post relay racks, contact sales@techrack.com.